Material Description
The insulating compound PH 300 A is based on polyisobutilene
and has permanently plastic characteristics.
PH 300 A is solvent-free, resistant against water and
influences of the weather and has a soft-sticky consistency.
Application
PH 300 A is used for sealing of tube and line breakthroughs,
(gas, water, current), against water and sand.
In addition it is used for sealing and filling of cable
penetrations.
The insulating compound PH 300 A sticks on nearly all
dry subsoils and plastic surfaces and shows an excellent
plastic workability. It does not run off by heat and does
not become cracked by cold weather. In addition it is water
impermeable.
Processing
The insulating compound PH 300A is ready for use. The
best processing temperature is between +10 to + 25°C.
The underground must be dry and clean. Metal surfaces
have to be derusted if necessary. Apply the compound by
hand or with spatula on the subsoil and press it on. If
possible do not apply on heated up groundings (e.g. by
strong sun exposure).
|
Storage
When stored in closed bucket in dry areas in the
temperature range from 10°C to +40°C it has nearly
unlimited shelf life.
Hazardous / Safety advice
Follow the advice printed on the containers and the
relevant safety data sheets.
Packaging
In plastic containers with 1 kg content
Delivery
In cartons |
