|
|
|
|
|
| |
| Straight Joint VMK |  |
for polymeric cables
3-core to 3-core
3-core to 3 single-core |
| Cable Type |
Cross Section
(mm²) |
Joint Box Type |
Cast Iron Joint Box |
Cast Resin
PU 910 |
N(A)YSEY,
NA2XY, N(A)2XSY,
N2XSEY, NA2XS2Y,
N(A)2XS(F)2Y |
3 x 16 - 25 |
VMK 10/1 |
VS 10/64 |
1 x 10 kg |
| 3 x 35 - 70 |
VMP 10/2 |
VS 10/75 |
2 x 8 = 16 kg |
| 3 x 95 - 240 |
VMK 10/3 |
VS 10/87 |
3 x 8 = 24 kg |
HÖHNE-10-kV-Sets are a combination of heat shrink
technique with polyurethane cast resin and cast-iron
joint boxes, combining the mechanical and electrical
advantages of all three systems. Within a short assembly
time a maximum of safety and extreme long time stability
is guaranteed.
Insulating Set
The insulating set is specially adapted to the existing
cable types and contains system seals, spreader caps,
fill- and smoothing bands, stress-control elements, shrink
tubes, earthing bridges and roll-springs with flexible
earthing braids.
Screw or compression connectors are not included.
|
Joint Box
The joint box is made of cast iron with special ventilation
tubes, earthing points, cover and mandrel in the nominal
sizes corresponding to the cable diameters. They are
impact resistant and allow immediate operation of the
cable after sealing – a high degree of mechanical safety.
Cast Resin
(according VDE 0291/Part 2)
Polyurethane cast resin type PU 910 is an unfilled, low
viscous, elastic hardening two-component system.
For technical data on cast resins please refer to the cast
resin section of the catalogue.
Specification
- Insulating set for the cable types, complete with system
accessories, without compression or screw connectors
- cast iron joint box
- cast resin in buckets / tins
|
|
|
 |
|
