Material description
OK 99 is a two-component sealing compound with very
good adhesive properties on metal and cable insulating
materials.
OK 99 is an elastic hardening compound which follows
the cable movements in the underground and has good
longitudinal water tightness.
During the hardening process the compound does not
heat up. OK 99 is easy and safe while handling. Joints can
be opened without destruction and the compound can be
removed.
The material is non-hazardous, so no labeling is required
in accordance with the EEC directives. It contains neither
isocyanates or other toxic or hazardous components. Due
to the marking-free components a problem-free disposal
is given.
Application
The two components (resin and hardener) are one unit,
exactly fine-tuned to each other. There is no further need
to weight out the components. The packing will be either
in two separate tins or in double-chamber bags. Before
you add the hardener, the resin-component should be
mixed up.
In case you choose the packing in tins, the hardener must
be filled completely into the resin and both components
must be mixed with constant stirring.
|
If you use the double-chamber bags, you must remove
the separator, so that both components run together.
After that both compontens can be easily mixed by
kneading the bag.
The time of mixing will be about 3 minutes. You can
recognize a homogenous mixture by the uniform colour
of the compound. During mixing it is important, that only
few air bubbles are mixed into the compound.
The final hardness will be reached after approximately
5 days.
Storage
The original closed tins/bags have to be stored in a dry
and frost-free place. Open units must be used at once.
The processing-guarantee is 24 months after production
date (see labels on the containers).
Hazardous / Safety advice
Follow the advice printed on the containers and the
relevant safety data sheets for resin and hardener.
|
