|
|
|
|
|
| |
| 1 kV Branch Joint with Fuse BMP |  |
| resin technique |
| Main Cable according to DIN/TGL | Branch Cable according to DIN/TGL |
| Type | Cross Section (mm²) | max. Diameter | Type | Cross Section (mm²) | max. Diameter |
N(A)YY, N(A)Y2Y
NA2XY, NA2X2Y | to 4 x 95 to 4 x 240 | 58 mm | N(A)YY, N(A)Y2Y
NA2XY, NA2X2Y | 4/5 x 4 to 4/5 x 16 | 26 mm |
Joint Box
Type |
Dimensions (mm) |
Resin Net
Weight |
Gross Weight
(packed set) |
| a = Ø |
b |
c |
| BMP 340/150 |
150 |
280 |
350 |
4,4 kg |
5,8 kg |
Handling
By few and simple mounting steps a fast and operatorsafe
assembly of the joint box is ensured.
The pre-mounted fuse-box allows the installition without
switching off the main cable voltage.
The fuses are accessable from the outside.
Application
The joint box is suitable for use with single clamps.
Quality
The joint box is system-tested according to VDE 0278 part
of 1 and 3 respectively hp 623. Our cast resins fulfill the
requirements of VDE 0291 part of 2 respectively hp 631.1.
By application of the quality management system in
accordance with DIN EN ISO 9001:2000 the quality of
our products is guaranteed. |
Specification
- two-part shell
- Fuse box, incl. fuses
- PUR and hardener in tins or alternatively in doublechamber
bags
- sealings
- stirring spatula (for tins)
- emery cloth
- protection gloves
- installation instructions
|
|
|
 |
|
